Overview

Zinsser Perma-White is a water-based mould resistant interior paint ideal for use on walls, ceilings, cabinets and trim in areas of high humidity and moisture. It’s formulated to resist peeling, cracking, and blistering for up to 7 years without any maintenance. Its self-priming formula allows the paint to stick to the surface without sanding. This product is ideal for both commercial and residential uses due to being washable, scrubbable, stain, and moisture resistant. For areas that are subject to challenging wear and tear, we would recommend using the satin and semi-gloss finishes.

• Fade Resistant
• Contains a biocide to protect the dried coating against fungal degradation
• Self-priming – sticks to surface without sanding
• Low odour

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, grease, oil, wax, mould or possible contaminants that may interfere with adhesion.

• Remove all existing mould and mildew before painting, with a product such as
• Scrape sand or brush any loose or flaking paint (always take special care when sanding or scraping the old surface, ensure to wear a suitable face covering to avoid inhalation.)
• Rust, tannin, grease, mould and mildew and other stains should be blocked with the appropriate stain killing primer-sealer such as
• When priming over stained areas, first attempt to remove as much of the stain as possible by washing, sanding, scraping, etc.

Application

Always test a small area to ensure you are happy with the finished results

• Shake or stir well before use
• Apply with a synthetic brush, roller or sprayer
• Only apply in temperatures between 10-32°C
• If using a sprayer use only water to thin the paint and no more than 10%
• Once first coat has been applied leave to dry for 2 hour before applying a second coat
• Paint will be fully cured in 7-10 days

Note: Always follow the manufacturer instructions found on the tin.