Overview
Osmo Top Oil is a clear or transparent oil ideal for treating interior furniture and kitchen worktops made of wood. The use of natural oils and waxes creates an even colour and harmonious appearance whilst protecting your interior wood without cracking, peeling or flaking. The finish is formulated to be food safe, extremely water and chemical resistant and easy to maintain.
- Food Safe
- Very durable and hardwearing
- Resistant to common liquid spillages such as water, juice, tea, cola and wine
- No sanding necessary for spot repairs or future applications
| Area | Interior |
| Recommended Use | Kitchen wooden worktop and tables |
| Base | Oil-Based |
| Coverage | Up to 24m² per litre |
| Drying Time | 8-10 Hours |
| Re-Coat Time | 8-10 Hours |
| Recommended Coats | 2 Coats |
| Application Method | Brush or Roller |
| VOC Levels | High |
Preparation
Always ensure the surface is clean, grease free and clear from dust and frost free.
- Clean old microporous stains (wood oils).
- Old paints and lacquers must be completely removed this can be done by sanding back or using a suitable chemical stripper.
- Fill cracks with a suitable wood filler, larger holes can be repaired with .
- Sand the surface carefully, starting with a coarse sandpaper and finish fine grade. For flooring 120-150 and for furniture 150-240, For kitchen work tops using absorbent hardwoods like Oak or Beech, final sanding grade P120. For very absorbent woods like Pine, sand to a maximum of P150.
- Before application ensure all dust has been removed.
Application
Always test a small area of surface to be treated before application to ensure you are happy with the finished look.
- Stir well before use.
- Do not thin, Osmo Top Oil is ready to use.
- Using a , microfibre roller or other suitable brush apply the oil thinly in the direction of the wood grain.
- Allow to dry for approx. 8-10 hours.
- Ventilate well while drying.
- Apply a second coat with a .
- Avoid covering during drying and curing, after 2-3 weeks the surface is fully cured.
- For renovations, one coat applied to a clean dry surface is usually sufficient.
Note: Always follow the manufacturer instructions found on the tin.
Aftercare & Storage
Cleaning
To clean us a duster or clean with a damp cloth and .
Maintenance
For cleaning stains and stubborn scuff marks on the satin finish use or .
When signs of wear become visible on the surface re-apply one coat of Osmo Top Oil to a cleaned and dried surface.
